palo alto default login

A user asks how to login to PAN-VM 10.0.6 with default credentials and gets a solution from another user. The solution involves waiting for the third prompt and following the link to the knowledge base article.

You must log in using the default username and password (admin/admin). The firewall will begin to initialize.

The default username and password are admin / admin, so we’ll go ahead and log in to reveal the CLI. From here, we’ll start setting up the proper IP address and subnet for the device, and the default gateway and DNS settings, so the unit can collect updates later.

Resolution. An example on the PA-500 is shown below. When the prompt displayed is #3, then the device is ready to accept the default username/password to allow login. Article provides information on the admin username not working after factory reset.

Access the CLI. Use a terminal emulator, such as PuTTY, to connect to the CLI of a Palo Alto Networks device in one of the following ways: SSH Connection. —To ensure you are logging in to your firewall and not a malicious device, you can verify the SSH connection to the firewall when you perform initial configuration .

Palo Alto Networks; Support; … PAN-OS Web Interface Help: Username and Password Requirements. Updated on . Tue Apr 09 01:36:14 UTC 2024 … Manage Default Trusted …

Answer. 1. Starting with PAN-OS 9.0.4, you must change the default administrator password (admin/admin) on the first admin account log in on a device. 2. The new password must be a minimum of eight characters and include a minimum of one lowercase and one uppercase character, as well as one number or special character. 3.

Recovering the administrator password is not possible. The password must be reset by booting into maintenance mode and load a previously saved configuration of which the password is known. To boot into maintenance mode, connect to the console via the console port and terminal software.